Pull out the battery, and insert a 12V replacement of a size that fits into the battery cage. Keep track of which clamp attached to the positive (+) and negative (-) terminals. You may need to scrape away some corrosion to get it loose. Loosen the metal clamps on the battery terminals with a crescent wrench. This should not be a significant risk though, since the Chrysler Pacifica battery is permanently sealed. Put on gloves to protect yourself from an acid burn. How to Change a Car Battery in a Chrysler Pacifica Snap the battery cover closed, if needed, and close the Beetle’s hood. Tighten the battery holder, retaining bolt to secure the battery.Īttach the positive battery cable to the positive battery terminal and then the negative battery cable to the negative battery terminal. The battery must sit flush in the holder. Place the new battery in the battery holder, making sure the negative and positive terminals are in the same location as the old battery. Locate the battery holder retaining bolt on the holder in front of the battery and loosen it using the same wrench used in Steps 3 and 4. Remove the positive battery cable by loosening the bolt and pulling it off of the positive battery terminal, which is marked by a “+” symbol. Unsnap the cover to expose the battery, if your vehicle’s battery has a cover.ĭisconnect the negative battery cable by loosening the bolt with an 8mm or 10mm wrench and lifting it off of the negative battery terminal, which is marked by a “-“ symbol.
0 Comments
Leave a Reply. |